Call NowSchedule

With regular maintenance you will prevent small problems from becoming big problems and ensure optimal performance of your system. Our AC Performance Tune-Up will help:

  • Provide longer lasting equipment
  • Reduce utility bills
  • Reduce repairs
  • Provide a more comfortable indoor environment
  • Protect your investment and
  • Keep Warranties Valid

Air Conditioning 20 Point Performance Tune-Up Checklist:

  • Adjust and program thermostat for current season
  • Clean condenser coil
  • Inspect and change standard size filters
  • Level condensing unit (additional labor charges may apply for sunken or defective pads)
  • Lubricate motor and fan bearings as well as other moving parts as necessary
  • Clean and inspect evaporator coil and drain pain when readily accessible (additional labor charges may apply for difficult cleaning of evaporator coil)
  • Clean and inspect condensation drain lines and fittings
  • Adjust and thoroughly clean blower motor and fan assembly as needed (additional labor charges may apply for difficult cleaning of blower/ fan assembly)
  • Inspect, tighten and test all electrical connections, including disconnect switch
  • Inspect all capacitors and contactors
  • Run test all controls, switches, relays, transformers, contactors, motors and fans
  • Measure starting and running amperes, line voltage, and control voltage
  • Test system starting capabilities
  • Check system for proper air flow and air delivery
  • Inspect and adjust all safety controls as needed
  • Digitally monitor refrigerant (Freon) pressures and temperatures
  • Digitally measure super heat and/or sub cooling
  • Check air conditioning system for proper production and capacity
  • Check for proper clearance surrounding air conditioning equipment
  • Complete a digital receipt for customer with system recommendations

Best Value – Ask about Annual Maintenance Agreements!


Nothing’s worse than sweating all night, being unable to get a good, restful sleep, and then going to work when it’s hot and miserable outside. Having your AC system tuned-up before the heat wave can help avoid unforeseen problems that cause sleepless nights!


While many people wait until it gets super hot outside to schedule their A/C Service, we recommend scheduling in the spring (May and early June is best). This saves you potential headaches (and sweating all night), and gives you much more flexibility in scheduling. In the springs months when the temperatures are warm and mild outside, most people aren’t using, let alone thinking about their A/C. That’s typically when our schedule is more flexible. By scheduling in May or early June, you’ll have peace of mind when the high temps roll in, and won’t have to worry about a broken A/C or a long waiting list during a heat wave.


We’ve had many customers ask if we can service their Air Conditioner during their Furnace tune up in the Fall.  Unfortunately, the outdoor temperatures have to be 70 degrees or higher to properly test system pressure. It is best to have your AC system tuned up in the spring on a warm day. A Service Agreement/Annual Maintenance Plan will ensure your system is taken care of at the proper time, and at a reduced rate.

Start typing and press Enter to search